 |
|
|---|---|
          |
|
|
2010 Audi S6 5.2L V10 FSI 35 HP and 36 Ft./Tq increase Power is measured at the wheels on Fabspeed MotorSport Dynojet in a controlled environment for accuracy. Dyno runs are accurately run with the same same transmission gear, same performance mode (sport or non-sport) and same cool down time in-between runs. Measurement was made with 1 x 65,000 CFM main cooling fan in the front of the vehicle with 2 x 5000 CFM "spot" cooling fans directed towards the air inlet scoops. Engine lid was closed to simulate actual air flow into the engine compartment. Dyno room temperature was 74.8 degrees Fahrenheit for both sets of run groups and fuel grade was pump 93 octane PA grade fuel.
EVOMSit
Software vs Stock
|
|
|
|
