> RESULTS <

2009 Porsche 997.2 3.8L DFI
Siemens-VDO SDI3 ECU
02-11-2009

EVOMSit Run 1: EVOMSit V4 Software HP and TQ (Solid Lines)
Baseline Run 2: Baseline - Stock Software HP and TQ (Dashed Lines)

Power is measured at 4 wheels on an independent Mustang 500 SE AWD dyno in a controlled environment for accuracy.   Dyno runs shown are the average runs of a 10 run sample group for both the Baseline and EVOMSit modified runs. Dyno runs are accurately run with the same RPM start point, same transmission gear, same octane fuel and same cool down time in-between runs.  Measurement was made with 1 x 65,000 CFM main cooling fan in the front of the vehicle with 2 x 5000 CFM "spot" cooling fans to extract exhaust fumes from the exhaust.  Dyno room temperature was 64.2 degrees Fahrenheit for both sets of run groups and fuel grade was 100% pump 91 octane CA grade oxygenated fuel.

Thank you Alex and James at Sharkwerks for the car and Stasis Engineering for the use of their dyno for the day.