2007 Porsche 997TT EVT850
Bosch ME7.8 ECU
03-08-2009
EVOMSit Run 1: [EVOMSit EVT850] – NO VTG Software
Baseline Run 2: Baseline – ALL Stock
Power is measured at the wheels on our Mustang 500 SE AWD dyno in a controlled environment for accuracy. Dyno runs shown are the average runs of a 10 run sample group for both the Baseline and [EVOMSit] modified runs. Dyno runs are accurately run with the same RPM start point, same transmission gear, same performance mode (sport or non-sport) and same cool down time in-between runs. Measurement was made with 1 x 65,000 CFM main cooling fan in the front of the vehicle with 2 x 5000 CFM “spot” cooling fans directed down the rear window. 1 x additional 45,000 CFM fan in the rear of the vehicle forcing fresh air into the rear engine compartment. 2 x 5000 CFM “spot” cooling fans reverse flow to cool the intercoolers. Rear decklid was closed to simulate actual air flow into the engine compartment. Dyno room temperature was 83.5 degrees Fahrenheit for both sets of run groups.
997 TT EVT850 Performance System Dyno Video
Power is measured at all 4 wheels.
Crank power is calculated by dividing the wheel power by .85
(~850 HP / 817 TQ)
