997.2 Carrera S

2009 Porsche 997.2 3.8L DFI

Siemens-VDO SDI3 ECU

EVOMSit Run 1: [EVOMSit] V4 Software HP and TQ (Solid Lines)
Baseline Run 2: Baseline – Stock Software HP and TQ (Dashed Lines)

Power is measured at 4 wheels on an independent Mustang 500 SE AWD dyno in a controlled environment for accuracy. Dyno runs shown are the average runs of a 10 run sample group for both the Baseline and [EVOMSit] modified runs. Dyno runs are accurately run with the same RPM start point, same transmission gear, same octane fuel and same cool down time in-between runs. Measurement was made with 1 x 65,000 CFM main cooling fan in the front of the vehicle with 2 x 5000 CFM “spot” cooling fans to extract exhaust fumes from the exhaust. Dyno room temperature was 64.2 degrees Fahrenheit for both sets of run groups and fuel grade was 100% pump 91 octane CA grade oxygenated fuel.

Thank you Alex and James at Sharkwerks for the car and Stasis Engineering for the use of their dyno for the day.