2005 Mercedes S65
Bosch ME2.8 ECU
12-11-2009
EVOMSit Run 28: [EVOMSit] Performance Software
Baseline Run 06: Baseline – ALL Stock
Power is measured at the wheels on Fabspeed MotorSport Dynojet in a controlled environment for accuracy. Dyno runs shown are the average runs of a 10 run sample group for both the Baseline and [EVOMSit] modified runs. Dyno runs are accurately run with the same RPM start point, same transmission gear, same performance mode (sport or non-sport) and same cool down time in-between runs. Measurement was made with 1 x 65,000 CFM main cooling fan in the front of the vehicle with 2 x 5000 CFM “spot” cooling fans directed towards the air inlet scoops. Engine lid was closed to simulate actual air flow into the engine compartment. Dyno room temperature was 74.8 degrees Fahrenheit for both sets of run groups and fuel grade was pump 93 octane PA grade fuel.
